How Long To Become A Plumber Gardendale AL

How to Select the Right Plumber Course near Gardendale Alabama

Gardendale AL plumbing contractor installing sinkThe initial step to becoming a plumbing tradesman or contractor is locating a plumbing school near Gardendale AL. But with so many technical schools to pick from, just how do you tackle making certain that you enroll in the right one? Especially because there are so many factors to evaluate. For instance, some students will begin by looking for schools that are close to their residence. When they have found several that are within driving distance, they will pick the one with the lowest tuition. While location and cost are of importance, they are not the only qualifications that must be considered. Also important are the reputations of the schools, their accreditation, in addition to their graduation and job placement rates. These and other qualifiers should help mold your final decision when choosing a plumber training school. We will address that checklist in greater detail later in this post. But first, let’s review a little bit about becoming a plumber and the educational options that are accessible.

Becoming a Plumber

Gardendale AL plumber installing sink faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Gardendale AL plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Gardendale AL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Gardendale AL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Gardendale AL plumber repairing water lineThere are several educational options available near Gardendale AL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Vocational Schools

Once you have decided to obtain a certificate, diploma or degree, you can start to refine your school options. Because there are so many plumbing tech and trade schools in the Gardendale AL area, it’s imperative to have a checklist of criteria that each school must meet. The first 2 that we discussed were location and the cost of tuition. And while both qualifiers may be important when making your selection, there are other variables that need to be considered as well. Below is a checklist of those additional qualifiers that you will need to assess prior to choosing a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing trade programs have acquired either a regional or a national accreditation. They may attain Institutional Accreditation, which focuses on the school’s programs overall, or Programmatic Accreditation, which relates to a specific program, for instance electrical technology. Make certain that the Gardendale AL program and school are accredited by a U.S. Department of Education approved accrediting organization, which includes the Accreditation Board for Engineering and Technology. In addition to helping ensure that you get a quality education, it can assist in securing financial assistance or student loans, which are in many cases unavailable for non-accredited schools. Additionally, a number of states require that the plumbing training program be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, another way of determining if a trade school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Alabama Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Gardendale AL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the course. A lower completion rate might indicate that students were unhappy with the course and dropped out. It could also mean that the teachers were not competent to train the students. It’s also important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which may mean more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the field, but also that it has the network of contacts to assist graduates obtain apprenticeships or jobs in the Gardendale AL area.

Are Apprenticeship Programs Sponsored?  Numerous plumber trade programs are taught in conjunction with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of plumbing companies or trade unions. Ask if the schools you are reviewing have working partnerships with local Gardendale AL plumbers or plumbing contractors. An apprenticeship not only provides a valuable experience by furnishing hands-on training, but it also supplies job opportunities and helps to form relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are up-to-date and what you will be working with in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. If not, ask a local Gardendale AL plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you are able to relocate, the school must be within commuting distance of your Gardendale AL home. Take note that if you decide to attend an out-of-state school, in addition to moving costs there might be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It’s important that you receive as much personalized training as possible, which can be challenging in larger classes. Ask if you can monitor a couple of the classes so that you can see how large they are and experience the interaction between teachers and students. Talk with some of the students and get their comments relating to class sizes and instruction. Finally, speak to a few of the teachers and learn what their level of experience is in Gardendale AL and what degrees or certifications they hold.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to handle your needs. If you can only attend classes in the evening or on weekends near Gardendale AL, confirm that the programs you are looking at provide those options. If you can only attend part-time, be sure that the school you select permits part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, illness or family issues.

How Long To Become A Plumber Gardendale Alabama

Gardendale AL plumber installing pipe fittingChoosing the right plumbing training program will undoubtedly be the most important decision you will make to launch your new career. You originally came to this website because of your interest in How Long To Become A Plumber and wanting more information on the topic Training For Plumbers. But as we have discussed in this article, there are a number of things that you will need to evaluate and compare among the schools you are reviewing. It’s a prerequisite that any plumbing training that you are reviewing includes a good deal of hands-on training. Classes need to be small in size and every student should have their own equipment to train with. Classroom teaching needs to provide a real-world context, and the training program should be up-to-date and conform with industry standards. Programs vary in length and the kind of credential provided, so you will have to determine what length of program and credential will best fulfill your needs. Each training program provides different options for certification as well. Probably the best means to research your short list of schools is to go to each campus and talk with the students and faculty. Take the time to attend a few classes. Inspect the campus and facilities. Make certain that you are confident that the training program you select is the right one for you. With the proper training, effort and commitment, you can become a professional plumber in Gardendale AL.

More Plumbing School Locations in Alabama

  • Plumbing Schools Pine Apple AL
  • Plumbing Training Courses Ryland AL
  • Plumber School Fairfield AL
  • Plumber Training School Nanafalia AL
  • Plumbing Training Near Me Selma AL
  • Accredited Schools For Plumbers Emelle AL
  • Plumber Certificate Town Creek AL
  • Plumbing Courses Phil Campbell AL
  • How To Become A Plumber Ardmore AL
  • Plumber Vocational School Jacksons Gap AL
  •  

     

    The location could not be found.

     

     

    Gardendale, Alabama

    A large farm settlement near the area today known as Gardendale was settled around 1825. Some years later, other settlers began to move into the community commonly known as Jugtown, a name given to the area based on the presence of a large jug and churn factory that operated in the area. Some years later, Hettie Thomason Cargo, a school teacher, would lead a campaign to change the name of the community. In 1906, the name Gardendale was selected, and in 1955, the City of Gardendale was officially incorporated. Today, with more than 13,000 residents (estimated), the city of Gardendale has grown to include more than 400 businesses, 4 schools, and 24 churches.[5]

    In 1996, the Olympic torch run passed through the city during the weeks leading up to the 1996 Summer Olympic Games in Atlanta. Before Interstate 65 was constructed, the main route between Nashville, Tennessee and Birmingham, Alabama was U.S. Route 31. Prior to being built as a four-lane road, U.S. 31 was a twisting two-lane road that is still largely visible today. From the north end of Gardendale, it is now Snow Rogers Road, North Road, Moncrief Road, and then Main Street southward through the city to the Fultondale city limit where it becomes Stouts Road. In the fall of 2008, new signs were placed along the original route of Stouts Road through Gardendale denoting its historical significance as a stagecoach route between Tennessee and Birmingham during the 19th century. The first traffic signals in the city were located along U.S. 31 at Tarrant Road, Fieldstown Road, and Moncrief Road as well as Tarrant Road at Pineywood Road. A new signal at the intersection of Fieldstown Road and Main Street near city hall replaced a blinking signal shortly thereafter. Fieldstown Road was a narrow two lane road from U.S. 31 westward until Interstate 65 was built and then Fieldstown Road was re-routed onto the new road in the mid-1980s. An abundance of traffic signals have been erected in the city since those early days. In approximately 1970, the city installed street lights along U.S. 31 from the Fultondale city limits northward to the Moncrief Road intersection. The technology at that time was for blue vapor lights. Today, nearly 40 years later those same blue vapor lights still exist with some being replaced with the more modern bulbs near major intersections. Since 1980, Gardendale has annexed considerable amounts of land on the north, east, and west sides. Much of the eastern area is uninhabited. The western annexation is centered along Fieldstown Road. Most of the newest residential development has been in this area and along Shady Grove Road south of Fieldstown Road. The northern annexation has centered along US 31 and extends nearly 2 miles (3.2 km) farther north than 1980. The city has a working historical society, established January 23, 2006, that is working to record the history of the Gardendale area. They have a museum that is open to the public on Saturday mornings each week. It contains a variety of photographs, documents, and other historical memorabilia from Gardendale.[citation needed]

    Gardendale is located at 33°39′36″N 86°48′46″W / 33.66000°N 86.81278°W / 33.66000; -86.81278 (33.6601033, -86.8127702).[1] According to the U.S. Census Bureau, the city has a total area of 18.0 square miles (47 km2), all land. However, with the recent annexation of several thousand acres from the community of Mt. Olive and other unincorporated areas, the city now has an estimated total area of around 25.0 square miles (65 km2). Gardendale is situated along one of the three major transportation corridors from the Midwest to the Gulf Coast (I-75, I-65, I-55). A tremendous volume of freight (via rail and truck) passes through or near Gardendale.

     

    Business Results 1 - 10 of 67

    Alabama Plumbing Pros
    2 Reviews
    Plumbing
    Phone:
    1518 Mt Olive Rd, Gardendale, AL 35071

    Singletary Plumbing
    1 Reviews
    Plumbing, Water Heater Installation/Repair
    Phone:
    6950 Garrett Rd, Gardendale, AL 35071

    Latta Plumbing Service
    1 Reviews
    Plumbing, Water Heater Installation/Repair, Hydro-jetting
    Phone:
    333 Decatur Hwy, Gardendale, AL 35071

    Drainblaster Plumbing Service
    6 Reviews
    Plumbing, Water Heater Installation/Repair, Septic Services
    Phone:
    Fultondale, AL 35068

    D & N Plumbing
    1 Reviews
    Plumbing
    Phone:
    2417 North Rd, Gardendale, AL 35071

    Keith The Plumber
    3 Reviews
    Plumbing, Water Heater Installation/Repair, Water Purification Services
    Phone:
    Trafford, AL 35172

    Ben's Plumbing
    6 Reviews
    Plumbing
    Phone:
    460 Exeter Dr, Birmingham, AL 35206

    OnTime Service
    14 Reviews
    Electricians, Plumbing, Heating & Air Conditioning/HVAC
    Phone:
    2668 Old Rocky Ridge Rd, Hoover, AL 35216

    Roto-Rooter Plumbing & Water Cleanup
    1 Reviews
    Plumbing, Damage Restoration, Water Heater Installation/Repair
    Phone:
    3865 Industrial Dr, Birmingham, AL 35217

    A1 Environmental Septic tank Services
    1 Reviews
    Septic Services, Plumbing
    Phone:
    1716 Republic Rd, Mount Olive, AL 35117