Category Archives: Kansas

Plumber Class Syracuse KS

How to Select the Best Plumbing Trade School near Syracuse Kansas

Syracuse KS plumbing contractor installing sinkThe first step to becoming a plumbing tradesman or contractor is locating a plumbing school near Syracuse KS. But with numerous technical schools to select from, just how do you tackle making certain that you enroll in the ideal one? Especially since there are a number of variables to examine. For example, some prospective students will commence by looking for schools that are close to their home. When they have identified a few that are within commuting distance, they will decide on the one with the most affordable tuition. While location and cost are significant, they are not the sole qualifications that need to be considered. Also important are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and additional qualifiers should influence your final judgment when choosing a plumbing training school. We will cover that checklist in greater detail later in this post. But first, let’s review a little bit about becoming a plumber and the training choices that are accessible.

Becoming a Plumber

Syracuse KS plumber installing sink faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Syracuse KS plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Syracuse KS plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Syracuse KS is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Syracuse KS plumber repairing water lineThere are several educational options available near Syracuse KS to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Technical Schools

Now that you have made a decision to obtain a certificate, diploma or degree, you can begin to refine your school options. Considering that there are so many plumbing vocational and trade schools in the Syracuse KS area, it’s imperative to have a checklist of qualifications that each school must meet. The initial two that we mentioned were location and tuition expense. And although both qualifiers may be critical when making your decision, there are other factors that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to assess before enrolling in a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have earned either a regional or a national accreditation. They may acquire Institutional Accreditation, which involves the school’s programs overall, or Programmatic Accreditation, which relates to an individual program, for instance electrical technology. Confirm that the Syracuse KS school is accredited by a U.S. Department of Education approved accrediting organization, for example the Accreditation Board for Engineering and Technology. Along with helping guarantee that you obtain an excellent education, it may help in obtaining financial assistance or student loans, which are often not available for non-accredited programs. Furthermore, a number of states require that the plumbing training course be accredited in order to be approved for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of determining if a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Kansas Department of Education.  If you don’t know, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Syracuse KS schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the portion or percentage of students who enroll in and complete the course. A lower completion rate may signify that students were disappointed with the course and quit. It may also mean that the instructors were not competent to instruct the students. It’s also important that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive directory of alumni, which may result in more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the industry, but also that it has the network of contacts to help graduates secure apprenticeships or employment in the Syracuse KS area.

Are Apprenticeship Programs Sponsored?  Many plumber vocational programs are taught in conjunction with an internship or an apprenticeship program. Those participating vocational and trade schools will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Ask if the schools you are reviewing have referring relationships with local Syracuse KS plumbers or plumbing companies. An apprenticeship not only provides a rewarding experience by providing practical training, but it also furnishes employment opportunities and helps to establish relationships in the local plumbing professional community.

Are there Modern Facilities?  Make sure that the campus facilities and the equipment that you will be instructed on are up-to-date and what you will be using in the field. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be looking for. Otherwise, ask a local Syracuse KS plumbing company if they can give you some pointers.

Where is the School Located?  Unless you can move, the school needs to be within commuting distance of your Syracuse KS residence. Remember that if you decide to enroll in an out-of-state school, in addition to relocation costs there may be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s desirable that you get as much personalized instruction as possible, which can be challenging in larger classes. Ask if you can sit in on some of the classes so that you can observe how large they are and experience the interaction between students and instructors. Talk with several of the students and get their comments regarding class sizes and instruction. Last, talk to some of the teachers and learn what their level of experience is in Syracuse KS and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are evaluating are flexible enough to fulfill your needs. If you can only go to classes at night or on weekends near Syracuse KS, verify that the schools you are considering offer those choices. If you can only attend part-time, be sure that the school you select allows part-time enrollment. Additionally, ask what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Plumber Class Syracuse Kansas

Syracuse KS plumber installing pipe fittingPicking the best plumbing training program will undoubtedly be the most important decision you will make to launch your new profession. You originally came to this website because of your interest in Plumber Class and wanting more information on the topic Accredited Plumbing Trade Schools. But as we have addressed in this article, there are several factors that you will need to evaluate and compare between the schools you are reviewing. It’s a prerequisite that any plumber tech school that you are reviewing includes a considerable amount of hands-on instruction. Classes should be smaller in size and each student must have their own equipment to train with. Classroom instruction needs to provide a real-world frame of reference, and the course of study should be up-to-date and conform with industry standards. Training programs vary in length and the type of credential provided, so you will need to decide what length of program and credential will best serve your needs. Each program offers different options for certification as well. Perhaps The ideal approach to research your short list of schools is to check out each campus and talk with the teachers and students. Take the time to monitor some classes. Tour the campus and facilities. Make certain that you are confident that the program you choose is the ideal one for you. With the right training, hard work and commitment, you can become a professional plumber in Syracuse KS.

More Plumbing School Locations in Kansas

  • Plumber Online Schools Alden KS
  • Training For Plumbers Shawnee Mission KS
  • How To Become A Plumber Near Holton KS
  • Trade Schools For Plumbers Damar KS
  • Accredited Schools For Plumbers Ottawa KS
  • Plumber School Paxico KS
  • Plumber Vocational Training Marienthal KS
  • Becoming A Master Plumber Isabel KS
  • Plumber Course Portis KS
  • Training For Plumbers Wilmore KS
  •  

     

    The location could not be found.

     

     

    Syracuse, Kansas

    Syracuse is located at 37°58′59″N 101°45′04″W / 37.982938°N 101.751224°W / 37.982938; -101.751224 (37.982938, -101.751224),[10] along U.S. Route 50 and the Atchison, Topeka and Santa Fe Railway, sixteen miles (twenty-six kilometers) from the Colorado border. The Arkansas River runs just south of the City of Syracuse. The countryside south of the Arkansas River is marked by sandhills. Located within these sandhills is the "Syracuse Sand Dunes," a city park covering 1,300 acres (5.3 km2), including a 40-acre (160,000 m2) fishing pond.

    As of the census[2] of 2010, there were 1,812 people, 715 households, and 460 families residing in the city. The population density was 442.0 inhabitants per square mile (170.7/km2). There were 832 housing units at an average density of 202.9 per square mile (78.3/km2). The racial makeup of the city was 76.7% White, 0.2% African American, 1.8% Native American, 0.2% Asian, 0.1% Pacific Islander, 19.4% from other races, and 1.6% from two or more races. Hispanic or Latino of any race were 32.7% of the population.

    There were 715 households of which 37.1% had children under the age of 18 living with them, 51.6% were married couples living together, 9.0% had a female householder with no husband present, 3.8% had a male householder with no wife present, and 35.7% were non-families. 31.5% of all households were made up of individuals and 14.3% had someone living alone who was 65 years of age or older. The average household size was 2.53 and the average family size was 3.23.

     

    Business Results 1 - 10 of 0